| |
-
the MEASURE Mode. The unit will beep after a successful storage of the measurement is completed. 2.1.4 POWER Button. This button is used to turn the SRM-232 ...
http://www.four-point-probes.com/srm_guide.pdf
-
The data from up to 127 measure- ments can be stored in the unit and then up- loaded to a PC via the included RS-232 cable. The SRM-232 is available in four ...
http://www.four-point-probes.com/srm.pdf
-
Extended measurement uncertainty. (for SRM basic unit with 1.5 m RF cable). 2700 3000 MHz. +1.9 / -2.4 dB. +3.2 / -5.3 dB. * Always base your calculations ...
http://www.narda-sts.com/pdf/fachartikel/AN_HF_1004_E_Messunsicherheit_2007_07_04.pdf
-
Operation. The SRM's basic unit contains the spectrum analyzer with the. RF input unit, measurement/operations processor, input pan- el and display. ...
http://www.narda-sts.us/pdf_files/DataSheets/SRM3000_DataSheet.pdf
-
standard units of measure. Part Number. In addition to specifying what data entities are going to be needed for SRM, the data model should also document ...
http://www2.sas.com/proceedings/sugi29/115-29.pdf
-
Measurement traceability - NIST's measurements of the SRM bullet signatures must be traceable to the SI unit of length. Bullet signature measurements ...
http://www.nist.gov/ts/msd/srm/upload/NIST-SRM-RM-Articlefinal.pdf
-
1000 V/m. Intrinsic noise display in conjunction with. 20 V/m for each frequency > 1 MHz with RBW = 1 kHz b the SRM basic unit. Measurement range limit ...
http://www.narda-sts.de/fileadmin/user_upload/literature/high_frequency/DS_SRM3006_EN.pdf
-
unit of measurement. This can be contrasted to items that ..... measure the components of the SRM. The first is called the missing partner bias (Kenny & La ...
http://www.psycontent.com/index/31356087J6U82240.pdf
|
Hot Searches last 24 hours:
|